MH500 Battery-Powered Hoist
Scaffolders, masons, and roofers have lived with the same trade-off for years: run a temporary generator to power a material hoist, or rely on site power to be properly ran and readily accessible. The new GEDA MH500 battery-powered hoist eliminates that trade-off entirely. This cordless rack and pinion material hoist runs on a 38V battery, lifts 500 lbs. up to 360 feet (110m), and installed quickly by clamping to the scaffold without the need for mast bolts, hardware, cable guides, fuel or an inch of power cable.
When designing the new MH500, GEDA took the best features of the proven MH440 and MH660 along with many new innovations designed for the tough, everyday scaffold operation. The MH500 battery-powered hoist with wireless controls removes the reliance on jobsite power.
Why Battery Power Changes the Job
The GEDA Battery Hoist transforms jobsite efficiency by eliminating the traditional bottlenecks that slow vertical material handling down. Unlike conventional hoists that require coordination with electricians, extensive cable runs, bulky cable spools, or the noise and fuel costs of a generator, the GEDA Battery Hoist is completely self-sufficient — simply place it on site and begin lifting immediately. There's no waiting, no scheduling conflicts, and no costly infrastructure to set up. Its straightforward design makes installation fast and intuitive, getting crews productive in a fraction of the time. And with fully wireless remote controls, operators can safely manage lifts from the optimal vantage point without being tethered to a control panel,keeping the workflow smooth, safe, and seamlessly efficient from the ground up.
Built for Real Construction Workflows
The MH500 battery-powered material hoist is purpose-built for scaffolders and trade contractors who need a fast, dependable lift without the infrastructure of a larger rack-and-pinion elevator. Core specifications include:
-
Load capacity: 227 kg (500 lbs.)
-
Lifting height: 0 to 110 m (0 to 360 ft.)
-
Lifting speed: 25 m/min (82 fpm)
-
Power source: 38V lithium-ion battery
-
Motor: Brushless, high-efficiency
-
Operation: GEDA wireless remote control
-
Origin: Engineered and manufactured in Germany
GEDA MH 500 Battery Hoist Spec Sheet
The load platform features a sliding frame that lets operators move material directly to the scaffold deck, closing the gap between the platform and the work surface so loading and unloading happen without hazardous reaches. It's the same proven design contractors trust in the wired MH series, now in a cordless configuration that sets up faster and travels lighter.
Quick Clamp-and-Go Installation
Setup on the MH500 is engineered for one or two crew members. The base unit clamps directly to scaffolding, the mast sections lock into place, and the unit is operational in a fraction of the time required by larger material lifts. There's no power drop to coordinate with the GC, no cord routing to plan around other trades, and no fuel to refill mid-shift. Anchor it, charge it, run it.
When the project moves, the hoist moves with it. Break it down, load it on the truck, and clamp it back up at the next location the same day. For contractors running multiple short-duration jobs, that mobility translates directly into more billable hours and less idle equipment.
Wireless Remote Control for Smarter Operation
The MH500 ships ready to operate with the GEDA wireless remote control. Operators position themselves where they can actually see the load, the landing, and the workers around the lift instead of being tethered to a control box at the base. That sightline improves safety, reduces miscommunication on the radio, and speeds up the entire load cycle.
For multi-level scaffolding work, the remote lets a single operator manage loading at grade and signaling from the deck without a second person stationed at the controls.
Who the MH500 Is Built For
This portable material hoist serves a specific set of contractors who need rack and pinion performance without the wired infrastructure:
Scaffolding contractors moving frames, planks, and modular components between grade and deck levels
-
Masonry and restoration crews lifting brick, mortar, stone, and tools to the upper working levels
-
Roofing contractors staging shingle bundles, membrane rolls, and equipment
-
Facade and stucco crews working on temporary scaffolds where power access is limited
-
General contractors and remodelers handling material logistics on residential and light commercial projects
If your crew is sized for the work but losing hours to manual material handling or waiting on power, the MH500 is the lift that fits the gap between a rope-and-pulley and a full construction hoist.
Backed by GEDA, Built in Germany
GEDA has manufactured rack-and-pinion elevators and material hoists for more than 90 years, and every MH500 ships from the same German production line that builds our larger transport platforms and personnel hoists. The MH500 meets the same engineering standards, uses the same high-quality components, and provides the same parts and service support that contractors expect from GEDA USA.
Compare it against the corded GEDA MH 660 Material Hoist if you need higher capacity on a stationary site, or browse the full material hoist lineup to find the right fit for your project. For scaffold-mounted applications, the MH500 pairs naturally with GEDA rack-and-pinion elevators on larger phased builds.
Request a Quote or Demo
The GEDA MH500 battery-powered hoist is available now through GEDA USA. To discuss specifications, accessories, pricing, or to arrange a job-site demo, contact our team or call 866-973-4332. Our specialists will help you spec the right configuration for your scaffolding system, your battery platform, and your project timeline.
Cut the cord. Move faster. Lift smarter with the MH500.
Frequently Asked Questions
What can the GEDA MH500 battery-powered hoist lift?
The MH500 lifts up to 500 lbs. (227 kg) per load at 82 fpm (25 m/min). That covers brick, mortar, shingle bundles, scaffold planks, and tool loads on most scaffold-mounted jobs. For heavier loads on a stationary site, the corded GEDA MH 660 Material Hoist is the next step up.
Does the MH500 need a generator or jobsite power?
No. The MH500 runs entirely on battery power, so there is no generator, extension cord, or power drop to set up. The base clamps directly to scaffolding, the mast sections lock into place, and a crew of one or two can have it lifting without waiting on an electrician.
Request A Quote
Contact one of our sales representatives today
to inquire about a quote from GEDA - USA
or call us today at 713-621-7272

